Graphics card cooler for all Ati X1800XL/XT/XT
PE (256MB) cards, acc. to reference design, based on the
Alphacool NexXxoS cooler series. New copper cooler with
parallel channels in PCF(c) mounting type, by means of
which the surface for the heat dissipation is drastically
increased. The water is supplied centrally, which enables
a highest possible cooling. This allows stable operation
at extreme summer temperatures, highest overclocking potential
and Low Noise at the same time.
This cooler is conceived for the highest
requirements, therefore the RAM modules are also cooled.
The channel leads directly over the RAM mounting parts
in order to offer optimal cooling. The surface of the
cooler is even, in order to adjust the differences of
level. 8x 1,5mm thermal pads for the RAM mounting parts
are included in delivery. Above the GPU, the coolers only
measure 1mm in order to achieve optimal cooling values.
The sealing between plexiglass and copper cooler is made
via a long-life O-sealing-ring. The mounting is made by
means of the bores for standard air coolers which come
with the Ati cards with screws. Two 5mm bores for optimal
LED lighting are also available. The G1/4" connections
are conceived for all connecting systems. A counter screen
is included in delivery for optimal contact pressure!
Technical data:
Overall dimensions (without connections):
Length 91 mm, Width 136 mm, Height 24 mm
Weight: 482 gr.
Connections: G1/4"
Note:
The GFX-cooler is delivered without connections! Please
order your wished connections under hoses&connections!
Here you find test reports about the product:
http://www.vadim.co.uk/news/ATI+X1800+vs+Nvidia+7800+-+second+round
