The (((Noise Blocker))) Black Silent Series is a cheap and reliable Ultra Silent Fan Series. Developed in Germany, Ultra Silent fans are characterized by a particularly low noise levels and very high reliability.

In contrast to most of the Far East fans approve the low noise level remains low, even after years on the same level.

The reason lies in the choice of materials and precise manufacturing.

Unlike 95% of all so-called "fan brands developed" (((Noise Blocker))) his own fans and also used in "favorable" series only high quality components. We are one of the few manufacturers to develop themselves and their fans exclusive offer. The BlackSilentFan fan series are simple and solid fan equipped with quality components, the course, a certain price.

The Rev. 3 of the series BlackSilentFan you purchase a reliable optimized for especially low noise level product. From now lie with the retail version of the 120 version screws.

With the further improvement in Quallität we will extend the warranty to 1 year for three years now.

There are two versions available, the 1 Series variants are designed, in principle, without a sound and standard systems, the more powerful of 2 versions are also scarcely perceptible in the operation and is designed for high performance systems ..

As our most durable long-life bearings and plain bearings is used.

The default rate and was only 0.01% (previously 0.15% to 100 000 units pa) again significantly improved.
The MTBF was now increased in real terms in 80 000 h for the Rev. 3 on.

Technical data:
Dimensions: 120x120x25mm
Weight: 120g
Rated voltage: 12 to 13.2 V
Start voltage: <6 Volt
Power consumption: 1.8 Watt
Input current: 0.27 A (Max)
Rated speed: 1500 (+ / - 10%)
Dielectric strength: 5 mA (Max)
Pressure: 1.044 mm-H2O
Airflow: 98 m3 / h
Noise level: 21 dB / A
MTBF (25 ° C): 80 000 hrs
Connector: 3 Pin Molex with tachometer signal line
Warranty: 36 months

Dimensions: 120 x 120 x 25 mm, weight: 175gr, connection: 3-pin molex, airflow: 109 m3/h, fan type:double bearing, trick-speed: 1550 turn/min, sound:38 dBA, inputs:1,95 W, tensions: 5-12 V

This Yate Loon 120mm case fan is high performance lower noise fan. This fans is only 28dB and provides 47 CFM. This is for the user that wants maximum cooling.

This Yate Loon 120mm case fan is high performance lower noise fan. This fans is only 28dB and provides 47 CFM. This is for the user that wants maximum cooling.

Wired with 4 Pin Molex Connector and splitter

Specifications:
Operating Temp: -10 - 65°C
Model: D12SM-12
Rated Voltage: 12V
Operating Voltage Range: 6.5 ~ 13.8V
Rated Current: 0.30A
Thickness: 25mm
Rated Speed: 1300 RPM ± 10%
Max Air Flow: 47 CFM
Sound Level: 28 dB

The Papst-Sintec fans dispose of a special ceramics sliding support. By means of this support, a very low noise operation is made possible with long service life, which was reached so far only by means of ball bearings. Additionally each fan is balanced in two levels, which provides a low vibration run. Our Papst fans are equipped with electronic wrong pole safety device, protection against blocking and overloading by impedance protection.

If you are looking for a very quiet fan of excellent quality, this model is our best recommendation.

Dimensions: 120 x 120 x 25 mm,
Weight: 175gr
Connection :3-pin molex
Airflow: 94 m3/h
Fan type: Sintec
Trick-speed: 1600 turn/min
Sound:26 dBA
Inputs:1,25 W
Tensions: 12v

The Papst-Sintec fans dispose of a special ceramics sliding support. By means of this support, a very low noise operation is made possible with long service life, which was reached so far only by means of ball bearings. Additionally each fan is balanced in two levels, which provides a low vibration run. Our Papst fans are equipped with electronic wrong pole safety device, protection against blocking and overloading by impedance protection.

If you are looking for a very quiet fan of excellent quality, this model is our best recommendation.

Dimensions: 120 x 120 x 25 mm
Weight: 175g
Connection: connection 3-pin Molex
Airstream: 70 m3/h
Fan type: Sintec
Rotational speed: 1200 U/min
Noise development: 18 dBA
Power input: 0,72 W
Tension: 12 V, 3-pin Molex

The Papst-Sintec fans dispose of a special ceramics sliding support. By means of this support, a very low noise operation is made possible with long service life, which was reached so far only by means of ball bearings. Additionally each fan is balanced in two levels, which provides a low vibration run. Our Papst fans are equipped with electronic wrong pole safety device, protection against blocking and overloading by impedance protection.

If you are looking for a very quiet fan of excellent quality, this model is our best recommendation.

Dimensions: 120 x 120 x 25 mm

# Technical details:#
# Connection: 3-Pin Molex plug
# Produced air flow: 35.2 CFM
# Fan type: Sintec Sintec slide bearing
# Rotational speed: 1000 revs./Minute
# Noise development: 14 dBA
# Power consumption: 0,72 W
# Voltage: 12 V
# Life span : 40°C/75°C: 80,000 / 35,000 hours

Power, high performance and silence are ensured with this Silent Eagle.

Scope of supply: Silent Eagle 1000 / 2000, universal cable set, rubber bolts, fan screws

Features:
New rotor blades and frame design
Fabric tube
Universal cable set (3-pole and 4-pole, separate signal line for spped monitor)

Voltage: 12 V (DC)
Power input: 2,16W
Speed: 2000 revs./min
Volume flow:119,6m³/h
Noise level: 36,1(A)
Connection: universal

Power, high performance and silence are ensured with this Silent Eagle.

Supplied with: Silent Eagle 1000 / 2000, universal cable set, rubber bolts, fan screws

Features:

New rotor blades and frame design
Fabric tube
Universal cable set (3-pole and 4-pole, separate signal line for spped monitor)


Voltage: 12 V (DC)
Power input: 2,16W
Speed: 2000 revs./min
Volume flow:119,6m³/h
Noise level: 36,1(A)
Connection: universal

Power, high performance and silence are ensured with this Silent Eagle.

Scope of supply: Silent Eagle 1000 / 2000, universal cable set, rubber bolts, fan screws

Features:
New rotor blades and frame design
Fabric tube
Universal cable set (3-pole and 4-pole, separate signal line for spped monitor)

Voltage: 12 V (DC)
Power input: 2,16W
Speed: 2000 revs./min
Volume flow: 62,5m³/h
Noise level: 19 dB(A)
Connection: universal

Adapter - Molex 4 pin
Voltage - 12V
Current - 0.18
Speed - 1700RPM
Airflow CFM - 65.12
Noise dBA - 30
Depth - 1"

Dimensions: 80mm x 80mm x 25mm
Weight: 92.5g
Speed: 2700 + - 300rpm.
Noise dBA 30
Air-flow CFM: 36.5
Bearing: 2 Ball bearing
Supply voltage: 12V - 4.8watt
Connection: Molex and 3pin

SUNON sets a high standard of quality control to strengthen its manufacturing proficiency. The company demands that the quality control testing be intense and comprehensive. To guarantee its customers a Total Quality Control, SUNON monitors every single manufacturing process. All products are subjected to a meticulous inspection before its delivery to the customers. By introducing the full-automatic production facilities into its operation, the company is capable to provide zero-defect production and the highest efficiency. Today, SUNON are well known for its quality and reliable products throughout the world.