Quantity:
Details:• High quality Clear Acrylic with Clear Fascia• LED Mount with Blue LED• Water-tight seals and individually pressure-leak tested.• Fits in One (1) 5 1/4 Drive Bay • Easy to install/Refill Center divider to eliminate air bubbles & noiseIncluded:• 1 x Blue LED • 4 Mounting Screws
Spare EK Multioption reservoir bottom revision 2. The part is compatible with both EK Reservoir rev1 and EK Multioption reservoir rev2Ships without barbs.
The smallest version of EK reservoirs!High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber gasket.Enclosed:2 fittings/barbs,2 plugs,2 Reservoir holders!Technical data:100ml capacityInstallation height: 110mmDiameter: 50mmTwo reservoir holders enclosed. Weight: 180g
High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.Enclosed 2 fittings/barbs, and 2 plugs!Technical data:170ml capacityInstallation height: 170mmDiameter: 50mmTwo reservoir holders enclosed. Weight: 200g
High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!Technical data:295ml capacityInstallation height: 250mmDiameter: 50mmTwo reservoir holder enclosed.Weight: 220g
High quality multioption EK multi option compensating reservoir for most advanced users!Manufactured of first class quality acrylic tube and POM Acetal.Bottom part gives user 3 options for placing the G1/4" fittings/barbs as intel or outlet.Optional top with G1/4" thread is can be used for additional fitting/barb as inlet of filling port.The compensating reservoir is very easy to fill and is sealed with high quality rubber washer.Enclosed 2 fittings/barbs, and 1 or 2 plugs, depending on selected option!Technical data:500ml capacityInstallation height: 400mmDiameter: 50mmTwo reservoir holder enclosed. Weight: 250g
Specs:Laser Cut Cast Acrylic Material 3/8" Thick Acrylic Side and Back Pieces Water-tight seals and pressure-leak tested. Fits in One (1) 5 1/4 Drive Bay Uses HIGH FLOW FITTINGS (See Picture) One (1) inlet and One (1) outlet fitting for higher reliability Two (2) Pre-Drilled 5mm LED Holes (See Picture) Easy to install/Refill Center divider to eliminate air bubbles 4 Fan Mounting Screws Contoured edges and corners - injury free installInstallation:Slide the Bay-Res reservoir into one 5 1/4 drive bay. Use the supplied screws to mount it into place. Connect the tubing. Note: Always leak-test equipment for at least 24 hours before installing in case.
Specs:Laser Cut Cast Acrylic Material 3/8 " Thick Acrylic Side and Back Pieces Water-tight seals and pressure-leak tested. Fits in Two (2) 5-1/4 Drive Bay Uses HIGH FLOW FITTINGS (See Picture) (1) inlet and One (1) outlet fitting for higher reliability (2) Pre-Drilled 5mm LED Holes (See Picture) Easy to install/Refill Center divider to eliminate air bubbles Includes Mounting Screws Contoured edges and corners- injury free install Installation:Slide the Bay-Res reservoir into TWO 5-1/4 drive bays. Use the supplied screws to mount it into place. Connect the tubing. Note: Always leak-test equipment for at least 24 hours before installing in case.
The Water Window Reservoir from AngelEye Technologies combines the functionality of a water-cooling reservoir with the aesthetics of a side panel window. Constructed of sturdy cast acrylic and factory pressure leak tested, the Water Window Reservoir is designed to deliver maximum durability.A 1/8" NPT fill plug at the top of the unit allows for easy filling and bleeding of the system. The reservoir utilizes a unique deep divider system to also help eliminate air bubbles from your lines. The kit itself includes practically everything you need to install the Water Window Reservoir inside your case. So show off your water-cooling system with the Water Window Reservoir from AngelEye Technologies!Features: Multi-purpose window kit and water reservoir in one Visually appealing all clear setup UV reactive barbs included Easy access fill plug Pressure leak testedSpecifications: 26.803 cubic inches of water volume Cast acrylic enclosure UV sensitive barbs (polypropylene based) 11.5" x 9.5" external window dimensions 1/2" hose barbs 1/8" NPT top fill plugParts: 1 x Water Window 1 x Self-Locking Molding 1 x Razor 1 x Installation Tool 1 x Tracing Washer 1 x Instruction Sheet Filling Funnel Filling Barb Filling TubingNOTE: Picture shown with optional UV sensitive water dye, and optional UV cold cathode illumination. Always leak test water-cooling equipment for at least 24 hours before installing in case.
Supplied with 1/2" or 3/8" Barbs,The new "Coolplex" compensating reservoir, manufactured of first class Röhm Plexiglas and aluminium. Two brackets for the external or internal mounting accompany the device. The compensating reservoir is easy to fill and will be closed with an oil inspection glass. This version has a climb-stencil (at intake), to prevent the aspiration of bubbles. This version has a G1/8" connection for Casemodder (in delivery status), where a lighting module with G1/8" can be screwed in; there are no limits set for coloring.Technical data:250ml capacityInstallation height: 250mmDiameter: 50mmConnection: 2xG1/4", and 1xG1/8" for the lighting moduleSealing cap: G1", fastening inclusive.
