MCT-40 is a revolutionary product designed to alleviate issues with standard water:

32FL OZ (945.06ml)
*Non-Conductive - Conductivity tested at 4e10 Ohms/meter
Freezing point is -40 Degrees Fahrenheit (-40 Degrees Celsius)
Prevents algae growth
Pre-mixed and ready to use
Low cost
Contains lubricating properties helping pump life
Prevents galvanic corrosion
Safe on plastic, rubber, seals copper, brass, aluminum, steel, and gaskets
Contains enhanced visual tanzinite properties with background lighting
Incorporates anti-foaming properties
Will not separate due to mechanic shearing
Procedure for cleaning components after exposure:
Allow to component(s) to dry.
Use electronics cleaner (or alcohol) to clean the components.
Allow component(s) to dry.
Re-Install and get Fragging!

* MCT -40 and MCT-5 are not likely to cause damage to operating pc boards powered at 12 volts or less. It is not to be exposed to power supply input voltage or components in the power supply unit. Electrical component and computer board manufactures of high performance equipment go to great lengths to keep manufacturing processes clean and free of contaminants. Any exposure of foreign material to your computer system pc boards is considered a potential contaminant and care should be taken to keep your system clean and free of such impurities. Examples include water, frost, condensation, dust, and coolant leaks.

MCT-5 is a revolutionary product designed to alleviate issues with standard water:

32FL OZ (945.06ml)
*Non-Conductive - Conductivity tested at 4e10 Ohms/meter
Freezing point is -5 Degrees Fahrenheit (-20 Degrees Celsius)
Prevents algae growth
Pre-mixed and ready to use
Low cost
Contains lubricating properties helping pump life
Prevents galvanic corrosion
Safe on plastic, rubber, seals copper, brass, aluminum, steel, and gaskets
Contains enhanced visual tanzinite properties with background lighting
Incorporates anti-foaming properties
Will not separate due to mechanic shearing
Procedure for cleaning components after exposure:
Allow to component(s) to dry.
Use electronics cleaner (or alcohol) to clean the components.
Allow component(s) to dry.
Re-Install and get Fragging!

*MCT -40 and MCT-5 are not likely to cause damage to operating pc boards powered at 12 volts or less. It is not to be exposed to power supply input voltage or components in the power supply unit. Electrical component and computer board manufactures of high performance equipment go to great lengths to keep manufacturing processes clean and free of contaminants. Any exposure of foreign material to your computer system pc boards is considered a potential contaminant and care should be taken to keep your system clean and free of such imputities. Examples include water, frost, condensation, dust, and coolant leaks.

Now Available

Fluid XP+ Ultra Non-Conductive 32 oz. Liquid Cooling Fluid is the latest non-conductive, non-toxic, non-corrosive and scale zapping, high performance liquid cooling fluid from the great minds at Fluid XP. With a boiling point of over 340°F and a freezing point below -99°F, Ultra is the most robust cooling fluid available. Plus it comes in multiple colors, including UV reactive colors.

The most notable thing that Fluid XP+ Ultra with z7 offers that no other PC coolant can or ever will offer is the special chemical bond it has with solid substances. If you're using a radiator and you notice that metal shavings have began flaking off of it and start floating around you system, if your using Fluid XP+ Ultra with z7 there will be no problem. Because Ultra with z7 will bond itself around the metal flakes which will suspend it in the liquid. This will stop build up in your system. No other PC coolant can or ever will offer such feature.

Now Available

Fluid XP+ Ultra Non-Conductive 32 oz. Liquid Cooling Fluid is the latest non-conductive, non-toxic, non-corrosive and scale zapping, high performance liquid cooling fluid from the great minds at Fluid XP. With a boiling point of over 340°F and a freezing point below -99°F, Ultra is the most robust cooling fluid available. Plus it comes in multiple colors, including UV reactive colors.

The most notable thing that Fluid XP+ Ultra with z7 offers that no other PC coolant can or ever will offer is the special chemical bond it has with solid substances. If you're using a radiator and you notice that metal shavings have began flaking off of it and start floating around you system, if your using Fluid XP+ Ultra with z7 there will be no problem. Because Ultra with z7 will bond itself around the metal flakes which will suspend it in the liquid. This will stop build up in your system. No other PC coolant can or ever will offer such feature.

If you would like to find out if a Fluid XP+ solution is right for you please feel free to e-mail info@fluidxp.com

Now Available

Fluid XP+ Ultra Non-Conductive 32 oz. Liquid Cooling Fluid is the latest non-conductive, non-toxic, non-corrosive and scale zapping, high performance liquid cooling fluid from the great minds at Fluid XP. With a boiling point of over 340°F and a freezing point below -99°F, Ultra is the most robust cooling fluid available. Plus it comes in multiple colors, including UV reactive colors.

The most notable thing that Fluid XP+ Ultra with z7 offers that no other PC coolant can or ever will offer is the special chemical bond it has with solid substances. If you're using a radiator and you notice that metal shavings have began flaking off of it and start floating around you system, if your using Fluid XP+ Ultra with z7 there will be no problem. Because Ultra with z7 will bond itself around the metal flakes which will suspend it in the liquid. This will stop build up in your system. No other PC coolant can or ever will offer such feature.

If you would like to find out if a Fluid XP+ solution is right for you please feel free to e-mail info@fluidxp.com

Now Available

Fluid XP+ Ultra Non-Conductive 32 oz. Liquid Cooling Fluid is the latest non-conductive, non-toxic, non-corrosive and scale zapping, high performance liquid cooling fluid from the great minds at Fluid XP. With a boiling point of over 340°F and a freezing point below -99°F, Ultra is the most robust cooling fluid available. Plus it comes in multiple colors, including UV reactive colors.

The most notable thing that Fluid XP+ Ultra with z7 offers that no other PC coolant can or ever will offer is the special chemical bond it has with solid substances. If you're using a radiator and you notice that metal shavings have began flaking off of it and start floating around you system, if your using Fluid XP+ Ultra with z7 there will be no problem. Because Ultra with z7 will bond itself around the metal flakes which will suspend it in the liquid. This will stop build up in your system. No other PC coolant can or ever will offer such feature.

If you would like to find out if a Fluid XP+ solution is right for you please feel free to e-mail info@fluidxp.com

Now Available

Fluid XP+ Ultra Non-Conductive 32 oz. Liquid Cooling Fluid is the latest non-conductive, non-toxic, non-corrosive and scale zapping, high performance liquid cooling fluid from the great minds at Fluid XP. With a boiling point of over 340°F and a freezing point below -99°F, Ultra is the most robust cooling fluid available. Plus it comes in multiple colors, including UV reactive colors.

The most notable thing that Fluid XP+ Ultra with z7 offers that no other PC coolant can or ever will offer is the special chemical bond it has with solid substances. If you're using a radiator and you notice that metal shavings have began flaking off of it and start floating around you system, if your using Fluid XP+ Ultra with z7 there will be no problem. Because Ultra with z7 will bond itself around the metal flakes which will suspend it in the liquid. This will stop build up in your system. No other PC coolant can or ever will offer such feature.

If you would like to find out if a Fluid XP+ solution is right for you please feel free to e-mail info@fluidxp.com

Available Soon

Fluid XP+ Ultra Non-Conductive 32 oz. Liquid Cooling Fluid is the latest non-conductive, non-toxic, non-corrosive and scale zapping, high performance liquid cooling fluid from the great minds at Fluid XP. With a boiling point of over 340°F and a freezing point below -99°F, Ultra is the most robust cooling fluid available. Plus it comes in multiple colors, including UV reactive colors.

The most notable thing that Fluid XP+ Ultra with z7 offers that no other PC coolant can or ever will offer is the special chemical bond it has with solid substances. If you're using a radiator and you notice that metal shavings have began flaking off of it and start floating around you system, if your using Fluid XP+ Ultra with z7 there will be no problem. Because Ultra with z7 will bond itself around the metal flakes which will suspend it in the liquid. This will stop build up in your system. No other PC coolant can or ever will offer such feature.

If you would like to find out if a Fluid XP+ solution is right for you please feel free to e-mail info@fluidxp.com

New Product - Now Available

Smoothy Wagons have done it again with an even purer type of coolant, Feser Aqua which is a Bi-Distilled water (2 times distilled) and specially designed for today's PC watercooling market. If your seeking a pure non conductive coolant with no dye pigments to corrupt the solution then this is 100% what you have been looking for!

Feser Aqua is The cleanest source on the market today.

Details:
• Feser Aqua or FA for short was filtered through 2 different processes of distillation, hence the term Bi-Distilled!
• Feser Aqua has to first of all passed through the reverse osmosis system, and shortly after this into the downstreamed De-Ionized system.
• This Ultra Pure water is free from salts, mineral debris, Ions, and water pollution.
• PH-Value is 5,5 – 6,5 and lies in the neutral ph-range.
• Feser Aqua is 100 times less conductive than standard Distilled/Di-Ionised water.

Features:
• Non Conductive
• Stable HDPE upright bottle
• Conductivity < 0,1 µs/cm (20°c)
• Safety Cap
• Prevents algae growth within your water cooling system
• Compatible with all available PC liquid-cooling systems
• Unopened shelf life of 3 years maximum
• Leaves no trace of lime sediments on hose/waterblocks ect.

Our Feser Aqua corresponds to following European regulations.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.

Smoothy Wagons GmbH releases new Non Conductive coolants for water cooling systems, brand name Feser One or F1 for short. The liquids mark themselves not only by the new variety of UV reactive colours but also through the new corrosion protection, which better protects metals like Copper, Aluminium , Brass and Nickel. The colour variety makes it possible for each PC Modder to take influence on individualizing the system.

The ready to use liquids are filled up in 1 litre bottles and can be filled directly into the cooling system reservoir or fill port. Mixing your own coolant belongs in the past! this is an all in one solution with 4 Anti Corrosive additives, Non conductive formula and UV Reactive. This is the only coolant to buy.

Details:
• Corrosion protection for Copper, Aluminium, Brass and Nickel
• Prevents Algae growth in your cooling system
• Conductivity less than 10µS/cm (20°C)
• Dropper Cap, No funnel required
• Ready for us, No mixing required
• Available in 6 UV Reactive colours
• Totally Odourless
• Environmentally Safe

Note:
Do not mix colours in this coolant, if any extra UV additive needs to be added use Feser One or Feser View to keep conductivity levels down.
If used for long periods of time the UV properties of this coolant will naturally fade, you can use Feser View UV Dye to fix this.
Do not mix this coolant with any other aftermarket additives, this may compromise the non conductive formula.

For more information on Smoothy Water Liquid please see The Liquid Cooling web site.