Zinc Plated Worm Drive clip
Working temperature -50C to 160C
Uniformed Hose Sealing (Gentle on Hose)
Wide Clamping Range
Resistant to most solvents, petroleum products and common chemicals

General Fitting Size
12mm - 20mm for 1/2" (12mm) Hose
10mm - 15mm for 3/8" (10mm) Hose

Zinc Plated Worm Drive clip
Working temperature -50C to 160C
Uniformed Hose Sealing (Gentle on Hose)
Wide Clamping Range
Resistant to most solvents, petroleum products and common chemicals

General Fitting Size
12mm - 20mm for 1/2" (12mm) Hose
10mm - 15mm for 3/8" (10mm) Hose

A one piece nylon hose clip that uses a proven double row of interlocking teeth. The result - an extremely secure fit when tightened.
Made from Nylon these Hose Clamps are totally resistant to corrosion and have the ability to be easily
adjusted even after many years in place and also reduce the risk of shorting against electrical componants.

16mm - 19mm for use with 12mm Hose Tail Barbs. (1/2" Thick Walled Hose)
15mm - 17mm for use with 10mm Hose Tail Barbs. (3/8" Thick Walled Hose)
12mm - 14mm for use with 8mm Hose Tail Barbs.

A one piece nylon hose clip that uses a proven double row of interlocking teeth. The result - an extremely secure fit when tightened.
Made from Nylon these Hose Clamps are totally resistant to corrosion and have the ability to be easily
adjusted even after many years in place and also reduce the risk of shorting against electrical componants.

16mm - 19mm for use with 12mm Hose Tail Barbs. (1/2" Thick Walled Hose)
15mm - 17mm for use with 10mm Hose Tail Barbs. (3/8" Thick Walled Hose)
12mm - 14mm for use with 8mm Hose Tail Barbs.

A one piece nylon hose clip that uses a proven double row of interlocking teeth. The result - an extremely secure fit when tightened.
Made from Nylon these Hose Clamps are totally resistant to corrosion and have the ability to be easily
adjusted even after many years in place and also reduce the risk of shorting against electrical componants.

16mm - 19mm for use with 12mm Hose Tail Barbs. (1/2" Thick Walled Hose)
15mm - 17mm for use with 10mm Hose Tail Barbs. (3/8" Thick Walled Hose)
12mm - 14mm for use with 8mm Hose Tail Barbs.

"O" clips are suitable for applications involving air, fluid, gas and steam hoses of rubber and plastic - also co-axial and other electrical cable.
The one piece design offers a positive clamping action and the rounded band edges prevent damage to the hose.

18mm for use with 12mm Hose Tail Barbs. (1/2" Thick Walled Hose)
15mm for use with 10mm Hose Tail Barbs. (3/8" Thick Walled Hose)
13mm for use with 8mm Hose Tail Barbs.

"O" clips are suitable for applications involving air, fluid, gas and steam hoses of rubber and plastic - also co-axial and other electrical cable.
The one piece design offers a positive clamping action and the rounded band edges prevent damage to the hose.

18mm for use with 12mm Hose Tail Barbs. (1/2" Thick Walled Hose)
15mm for use with 10mm Hose Tail Barbs. (3/8" Thick Walled Hose)
13mm for use with 8mm Hose Tail Barbs.

"O" clips are suitable for applications involving air, fluid, gas and steam hoses of rubber and plastic - also co-axial and other electrical cable.
The one piece design offers a positive clamping action and the rounded band edges prevent damage to the hose.

18mm for use with 12mm Hose Tail Barbs. (1/2" Thick Walled Hose)
15mm for use with 10mm Hose Tail Barbs. (3/8" Thick Walled Hose)
13mm for use with 8mm Hose Tail Barbs.