The DD-IONE is designed to provide maximum cooling for the NVIDIA GeForce 8800 GT and GTS (Based on G92) Video Cards

Danger Den and BFG Technologies worked together to bring a top of the line watercooling product to the 8800 GT and GTS.

NOTE: This support the G92 - GT/GTS Version with 512MB of RAM. The IONE will also fit the 1GB version with RAMsinks on the back side for the RAM modules.

New Features:
Compatible with Reference Design 8800 GT and GTS (G92 versions) Video Cards (BFG, EVGA, XFX, PNY, etc).
Uses the Additional RAM Pad mounting point for maximum mounting contact
Contact pads with the PCB to avoid warping or bending of the video card.
Lower profile design to allow use of PCI slots on the top side of the block
New hold down design to allow the use of the PCI slot on the backside of the card.
Cools all heat generating points on the card - GPU, RAM, Voltage Regulators, I/O Chip

Includes:
Complete Block Assembled with Delrin Top, and Gaskets
High Flow G 1/4 - 1/2", 3/8" or 1/4" OD Fittings and additional SLI Fitting
Prepped for SLI Design
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Downs
Hand Lapped
Pressure tested before shipment
Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Thermal Pads, and Ceramique.
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.
Never reuse Air Heatsink Thermal Pads just use the supplied ceramique on the RAM and GPU

The DD-8800GTX is designed to provide maximum cooling for the NVIDIA GeForce 8800 GTX Video Cards

Danger Den and BFG Technologies worked together to bring a top of the line watercooling product to the 8800 GTX.

New Features :
Compatible with Reference Design 8800 GTX Video Cards (BFG, EVGA, XFX, PNY, etc).
Uses the Additional RAM Pad mounting point for maximum mounting contact
Lower profile design to allow use of PCI slots on the top side of the block
New hold down design to allow the use of the PCI slot on the backside of the card.
Cools all 26 heat generating points on the card - GPU, RAM, Voltage Regulators, I/O Chip
Available from BFG Technologies assembled and with the True Life Warrenty

Includes:
Complete Block Assembled with Delrin Top, and Gaskets
High Flow G 1/4 1/2" or 3/8" OD Fittings and additional SLI Fitting
Prepped for SLI Design
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Downs
Hand Lapped
Pressure tested before shipment
Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.

Note: A full graphic installation guide by ourselves can be found here

The DD-8800GTS-PC is designed to provide maximum cooling
for the NVIDIA GeForce 8800GTS Video Cards

Danger Den and BFG Technologies worked together to bring a top of the line watercooling product to the 8800GTS.

New Features:
New Lightweight Black Polycarbonate Top
Compatible with Reference Design 8800 GTS Video Cards (BFG, EVGA, XFX, PNY, etc).
Compatible with 320MB and 640MB versions
Uses the Additional RAM Pad mounting point for maximum mounting contact
Lower profile design to allow use of PCI slots on the top side of the block
New hold down design to allow the use of the PCI slot on the backside of the card.
Cools all heat generating points on the card - GPU, RAM, Voltage Regulators, I/O Chip
Available from BFG Technologies assembled and with the True Life Warranty

Additional Features:
Complete Block Assembled with Polycarbonate Top, and Gaskets
High Flow G 1/4 1/2" or 3/8" OD Fittings and additional SLI Fitting
Prepped for SLI Design
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Downs
Hand Lapped
Pressure tested before shipment
Ships with Hold Down Materials, Thermal Pads, and Ceramique.
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.
Never reuse Air Heatsink Thermal Pads just use the supplied ceramique on the RAM and GPU

Benefits:
GTS version with DD watercooling allows MASSIVE overclocking (most cards over 30%!!)
Load Temperatures with DD watercooling is typcially lower than Idle Temperatures on stock air cooling
Possible increase in video card life due to lower temperatures
Ready to go for SLI

The DD-GX2 is designed to provide maximum cooling for the NVIDIA 7950 GX2 Series Video Cards

New Features :
Compatible with the 7950 GX2 Video Cards
Compatible in QUAD-SLI setups!!
Uses the Additional RAM Pad mounting point for maximum mounting contact
Lower profile design to allow use of PCI slots on the top side of the block
New hold down design to allow the use of the PCI slot on the backside of the card.

Includes:
Complete Block Assembled with Lucite Top, Delrin/Acetal Mid Plate, Copper Bases, and Gaskets
High Flow G 1/4 1/2" or 3/8" OD Fittings and additional QUAD-SLI Fitting.
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Downs
Hand Lapped
Pressure tested before shipment
Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.

New Features:
Compatible with the 7800/7900 GT & GTX Single and SLI configurations!
Lower profile top and stainless steel holdowns now allow use of PCI slots on either side of the card!!
Uses the Additional RAM Pad mounting points for maximum mounting contact

Includes:
Complete Block Assembled with Top and Gaskets
High Flow 1/2" or 3/8" OD Fittings
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Down
Hand Lapped
Pressure tested before shipment
Includes - Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam. Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation.

NOTE:
New: Compatible with the 7900GT and GTX single and SLI series

NOT compatible with the GS series video Cards

The Acetal MAZE4 series was designed to provide a light weight high perfomance solution for any setup.

Includes:
Complete Block Assembled with Top and O-ring
Total weight approximately 6oz (171 grams)
High Flow 1/2" or 3/8" OD Fittings
Low flow restriction low pressure drop
Stainless Steel Hold Down
Machined Lapped and polished beyond 1200 grit
Pressure tested before shipment to 85psi

Compatibility ATI:
Most Radeon Series blocks (9500, 9600, 9800, and X800 series) with the two hole mounted fans. Excludes the All-In-Wonders at this time

Compatibility Nvidia:
*NEW* support for the 6800 series and support for the "4" series on up to 59XXFX. Holes are available for the GeForce 2 and 3 series and should work also.
The 6800 series uses the 4 bolt hold down style versus the standard two bolt pattern of previous cards.

The Maze4 GPU Sli Kit is designed to provide maximum cooling for the Dual Video Card (SLI) series. This is a light weight solution that will fit most motherboards and video cards on the market.

Includes:
Two (2) Maze4 GPU Low Profile blocks assembled.
16 Xilence RAMsinks included (Some modifications may be needed under the fittings)
1 Foot of Tygon tubing
High Flow 1/2" or 3/8" OD Fittings
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Down
Machined Lapped and polished beyond 1200 grit
Pressure tested before shipment

Includes:
Two (2) Complete Blocks Assembled with Top, O-Ring, and Fittings. Ships with Hold Down Materials, Backing Plates, and Insulating Foam.

Please leak test 24hrs upon receipt. Verify secure mount 48hrs after installation. For Reference Only - Tempertures with an A64 chip, Black Ice II, and 6800 Ultra at 475Mhz dropped 30C under load.

Known compatible Motherboards:
ASUS A8N series
MSI K8N Neo4 Platinum SLI series
GIGABYTE GA-K8N SLI series
DFI LANPARTY UT nF4 SLI series