Now Available

Danger Den was contacted by ATI to help cool their newest and greatest video card. And Danger Den has just been Crossfire Certified!!

Features:
Pure Copper 110 used for the copper base
High Flow design
RAMSink has direct contact with watercooled base
Easy installation with Hard Mount Stops built into the block.
Compatible with reference
Crossfire Compatible and Certified!!

Benefits:
Significantly reduces Load and Idle temperatures on the video card 20-30C+
Capable of massive overclocks - card/silicon dependent
Completely Anit-Corrosive. No Aluminum used
Prepped for Crossfire
Smoked acrylic top!
All hardware is included to mount one block to one card...including thermal pads and Ceramique thermal paste.

Advantages:
Includes the Danger Den warranty and support via Phone, Email, Forums, Live Chat, or Ticket system!!!
Reduce temperature by more than 20-30+C
Bridges to cool all components are built in! No fumbling with bridge mounting hardware
Allows the removal of the noisy fans on the Stock / OEM heatsink
Uses the international standard G 1/4 BSPP Fittings
Every block is pressure leak tested before shipment
Use RAMsinks on the backside of the card

Now Available

Danger Den was contacted by ATI to help tame their new beast of a card. The first five Crossfire Sets flew out the door on there way to the 2007 Computex in Taipei!

Features:
Pure Copper 110 used for the copper base
High Flow design
RAMSink has direct contact with watercooled base
Easy installation with Hard Mount Stops built into the block.
Compatible with HD2900XT and HD2900PRO
Crossfire Compatible!
Benefits:
Significantly reduces Load and Idle temperatures on the video card
Capable of massive overclocks - card/silicon dependent
Completely Anit-Corrosive. No Aluminum used
Prepped for Crossfire
See through Acrylic Top is back!
All hardware is included to mount one block to one card...including thermal pads and Ceramique thermal paste.

Advantages
Includes the Danger Den warranty and support via Phone, Email, Forums, Live Chat, or Ticket system!!!
Reduce temperature by more than 20C
Bridges to cool all components are built in! No fumbling with bridge mounting hardware
Allows the removal of the noisy fans on the Stock / OEM heatsink
Uses the international standard G 1/4 BSPP Fittings
Every block is pressure leak tested before shipment

The Tyee is designed to provide maximum cooling for the ATI X1800 and X1900 series cards (Check the compatability list below)

New Features :
Known compatible with the X1900 Standard (slave) and Master. X1800 Standard. Not compatible with AIW cards.
Uses the Additional RAM Pad mounting points for maximum mounting contact
Lower profile design to allow use of PCI slots on the top side of the block
New hold down stainless steel design to allow the use of the PCI slot on the backside of the card.
Modular design to allow cooling of the MASTER encoder chip and/or the Heat Bridge for the Voltage Regulators

Includes:
Complete Block Assembled with Top and Gaskets
Perfect Seal G 1/4 1/2" or 3/8" OD Fittings
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Downs
Hand Lapped
Pressure tested before shipment
Complete Block Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.

Options:
Standard Version for single card cooling solutions.
Prep for Crossfire - Adds additional plugged ports for later converions to Crossfire
Optional Heat Bridge - For cooling the voltage regulators
Optional Encoder Bridge - Required for cooling the Video Encoder chip on the MASTER Cards ONLY

The Tyee is designed to provide maximum cooling for the ATI X1800 and X1900 series cards (Check the compatability list below)

New Features :
Known compatible with the X1900 Standard (slave) and Master. X1800 Standard - Not tested with X1800 Master. Not compatible with AIW cards.
Uses the Additional RAM Pad mounting points for maximum mounting contact
Lower profile design to allow use of PCI slots on the top side of the block
New hold down stainless steel design to allow the use of the PCI slot on the backside of the card.
Modular design to allow cooling of the MASTER encoder chip and/or the Heat Bridge for the Voltage Regulators

Includes:
Two (2) complete Block Assembled with Top and Gaskets
One (1) Master Video Encoder Cooling Bridge
Perfect Seal G 1/4 1/2" or 3/8" OD Fittings
Just one Inlet and Outlet for complete cooling
Low flow restriction low pressure drop
Stainless Steel Hold Downs
Hand Lapped
Pressure tested before shipment
Complete Blocks Assembled with Top, Gaskets, and Fittings. Ships with Hold Down Materials, Backing Plate, and Insulating Foam.
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.

Options:
Heat Bridges - For cooling the voltage regulators on each card

Encoder Bridge - Required for cooling the Video Encoder chip on the MASTER Cards ONLY

Heat Bridge - For cooling the voltage regulators

The Maze5-GPU is designed to significantly improve
the cooling over the former MAZE4-GPU Product!

It is also designed with the award winning Delrin/Acetal
top providing a light weight & anti-corrosive solution.

Features:
Over 100% increased Surface Area for significantly improved heat transfer
Machine Lapped and Polished
Choice of fitting size
Complete block weighs about 6oz (171 grams)
Non-Corrosive design
Delrin/Acetal Top chamber allows full use of channels with minimal flow loss.
Pressure tested before shipment.

Compatibility NVIDIA:
7900GT, GTX and GS series (Series 2 Hold Down Style)
7800GT, GTX, 6800 Series, 59XX Series (Series 2 Hold Down Style)
Older cards or cards with 2 hole mount system (Uses Series 1 Hold Down Style)

Compatibility ATI:
X1900, X1800, X1600 with 4 Hole Mount System (Series 2 Hold Down Style)
Compatibility ATI: Most Radeon Series blocks (9500, 9600, 9800, and X800 series) with the two hole mounted fans (Series 1 Hold Down Style).
Excludes the All-In-Wonders before the X1900 Series,

Includes:
Complete Block assembled with Top and Fittings.
High Flow G 1/4 1/2" or 3/8" OD Fittings
Low flow restriction low pressure drop
Stainless Steel Hold Down
Pressure tested before shipment
Please leak test 24hrs upon receipt.
Verify secure mount 48hrs after installation.

The Acetal MAZE4 series was designed to provide a light weight high perfomance solution for any setup.

Includes:
Complete Block Assembled with Top and O-ring
Total weight approximately 6oz (171 grams)
High Flow 1/2" or 3/8" OD Fittings
Low flow restriction low pressure drop
Stainless Steel Hold Down
Machined Lapped and polished beyond 1200 grit
Pressure tested before shipment to 85psi

Compatibility ATI:
Most Radeon Series blocks (9500, 9600, 9800, and X800 series) with the two hole mounted fans. Excludes the All-In-Wonders at this time

Compatibility Nvidia:
*NEW* support for the 6800 series and support for the "4" series on up to 59XXFX. Holes are available for the GeForce 2 and 3 series and should work also.
The 6800 series uses the 4 bolt hold down style versus the standard two bolt pattern of previous cards.

The MAZE4-1 GPU block will get the lowest temps with an easy to install kit.

Includes:
Di-Electric Grease
Neoprene Condensation Prevention Kit
Support Bracket
Complete Block Assembled with Top and O-ring
100% Copper 110
Acetal (Delrin) Top - NO Corrosion, NO Cracking
High Flow 1/2" or 3/8" OD Fittings
Stainless Steel Hold Down
Machined Lapped and polished beyond 1200 grit
Pressure tested before shipment to 85psi
Max Peltier (TEC) Size is 40mm x 40mm